Section 396 (Transfer Case - Automatic Shift): Specifications
WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications
| Item | Specification |
|---|---|
| Sealant | |
| Threadlock and Sealer E0AZ-19554-AA | WSK-M2G351-A5 |
| Ultra Silicone Sealant F7TZ-19554-AA | Dana 5-17 |
| Lubricant | |
| MERCON® Multi-Purpose (ATF) Transmission Fluid XT-2-QDX | MERCON® |
| Capacity | |
| Transfer Case L (Pint) | 1.2 (2.5) |
TORQUE SPECIFICATIONS
| Description | Nm | Lb-Ft | Lb-In |
|---|---|---|---|
| Nut retaining the flange to the rear output shaft | 355 | 262 | --- |
| Bolt retaining the rear driveshaft to the flange | 111 | 82 | --- |
| Bolt retaining the motor assembly and connector to the transfer case cover | 10 | --- | 89 |
| Bolt retaining the skid plate to the frame | 24 | 18 | --- |
| Bolt retaining the damper to the transfer case | 40 | 30 | --- |
| Drain plug | 24 | 18 | --- |
| Bolt retaining the driveshaft CV joint to the front output shaft assembly | 30 | 22 | --- |
| Bolt retaining the transfer case to the extension housing | 54 | 40 | --- |
| Bolt retaining the front adapter to the transfer case | 34 | 25 | --- |
| Bolt retaining the transfer case to the transfer case cover | 34 | 25 | --- |
| Bolt retaining the transfer case cover to the transfer case | 34 | 25 | --- |
| Fill plug | 24 | 18 | --- |