Torque Specifications
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | N.m | lb-ft | lb-in |
|---|---|---|---|
| Catalytic converter-to-exhaust pipe nuts and screws | 40 | 30 | - |
| Catalytic converter-to-crossover pipe nuts | 40 | 30 | - |
| Center support capscrew | 11 | 8 | - |
| Converter housing screws | 44 | 32 | - |
| Converter housing-to-engine screws | 48 | 35 | - |
| Transmission mount to extension housing | 102 | 75 | - |
| Crossmember nuts to transmission mount | 102 | 75 | - |
| Digital transmission range (TR) sensor screws | 10 | - | 89 |
| Extension housing screws and studs | 44 | 32 | - |
| Fluid pump screws | 25 | 18 | - |
| Front band locknut | 54 | 40 | - |
| Intermediate band locknut | 54 | 40 | - |
| Low/Reverse servo cover screws | 13 | 10 | - |
| Main control valve body screws | 10 | - | 89 |
| Manual control outer lever nut | 48 | 35 | - |
| Manual valve detent spring screw | 10 | - | 89 |
| Manual valve inner lever nut | 48 | 35 | - |
| Output shaft speed (OSS) sensor screw | 10 | - | 89 |
| Intermediate shaft speed (ISS) sensor screw | 10 | - | 89 |
| Pressure plug to case (line and EPC) | 10 | - | 89 |
| Rear driveshaft bolts | 111 | 82 | - |
| Separator plate screws | 7 | - | 62 |
| Solenoid clamp screws | 7 | - | 62 |
| Torque converter-to-flexplate nuts | 35 | 26 | - |
| Transmission cooler lines case connectors | 39 | 29 | - |
| Transmission cooler line nut | 28 | 21 | - |
| Transmission fluid filter screw | 10 | - | 89 |
| Transmission fluid pan screws | 14 | 10 | - |
| Transmission servo heat shield nut | 10 | - | 89 |
| Transmission servo heat shield stud | 14 | 10 | - |
| Transmission mount nuts to crossmember | 99 | 73 | - |
| Transmission mount-to-extension housing screws | 99 | 73 | - |
| Turbine shaft speed (TSS) sensor screw | 10 | - | 89 |
| Rear transmission insulator | 30 | 22 | - |