LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 698 (Module Configuration System -- Excursion & F250-F550 Super Duty) >> General Procedures >> Programmable Module Installation >> Using The New Generation STAR (NGS) Tester When The Original Body Chassis Electrical Module Is Not Available >> Step B
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Step B

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press trigger.
  2. If the NGS asks for vehicle data - enter the vehicle data then press store.
  3. The NGS will ask for module data line 1 - enter data and press store.
  4. The NGS will then ask if there is an additional line of data available for that address - Select YES or NO depending on the information in the As Built Data Sheet.
  5. Repeat Steps 3 and 4 until the answer is NO for Step 4.
  6. The NGS should show a screen stating that module data was stored - press trigger.
  7. Follow the on-screen instructions.
  8. SELECT: Restore Configuration - New ECU then press trigger.
  9. The NGS will complete loading the entered data.