Torque Specifications Chart
WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS CHART
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brush and terminal holder (6.0L) | 3 | - | 27 |
| Brush and terminal holder retaining screws | 2.8-4.0 | - | 25-35 |
| Generator B+ terminal nut (6.0L) | 8 | - | 71 |
| Generator B+ terminal nut (4.6L, 5.4L, and 6.8L) | 7-9 | - | 62-80 |
| Generator bottom mounting bolts (4.6L, 5.4L, and 6.8L) | 25 | 18 | - |
| Generator mounting mounting bolts/stud bolts (6.0L) | 47 | 35 | - |
| Generator mounting bolts (4.6L, 5.4L, and 6.8L) | 22 | 16-21 | - |
| Generator regulator and brushes mounting screws | 2.3-3.4 | - | 20-30 |
| Generator top bracket mounting bolts (4.6L, 5.4L, and 6.8L) | 10 | - | 89 |
| Ground strap | 8 | - | 71 |
| Manifold absolute pressure (MAP) bracket screws | 5 | - | 44 |
| Oil filler neck bracket screw | 2 | - | 18 |
| Power steering reservoir bracket screws | 8 | - | 71 |
| Pulley nut | 82-135 | 61-99 | - |
| Turbo-to-air cooler pipe bracket screws | 2 | - | 18 |
| Turbo-to-air cooler pipe bracket stud nut and bolt | 25 | 18 | - |
| Turbo-to-air cooler pipe clamps (6.0L) | 12 | 9 | - |
| Upper intake plenum to generator bracket bolts (4.6L, 5.4L, and 6.8L) | 9-12 | - | 80-106 |
| Wiring harness conduit screws | 2 | - | 18 |
| Voltage regulator | 4 | - | 35 |