LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Steering >> Electronic Steering System >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS (PUMP)

Application Ft. Lbs. (N.m)
EVO Actuator Mount Bolt 10-15 (14-20)
Pressure Hose Nut-To-Pump 40-54 (54-73)
Pump Mount Bolt 15-22 (20-30)
Quick-Connect Fitting 35-45 (47-61)
TORQUE SPECIFICATIONS (STEERING GEAR)

Application Ft. Lbs. (N.m)
Fittings At Steering Gear 15 (20)
Front Sub-Frame Bracket Bolt 59 (80)
Idler Arm-To-Drag Link Nut (1) 56 (76)
Mesh Load Adjuster Locknut 23 (31)
Pitman Arm Retaining Nut 225 (305)
Power Steering Auxilary Actuator Nut 13 (17)
Power Steering Pump Nut 18 (25)
Pressure Fitting At Steering Pump 30 (40)
Sector Shaft Arm To Drag Link Nut 56 (76)
Sector Shaft Housing Bolts 50 (68)
Steering Column Lower Shaft Pinch Bolts 35 (48)
Steering Gear Bolts 58 (78)
Steering Idler Arm 59 (80)
Tie Rod End Clamp Bolt 21 (28)
Tie Rod End Retaining Nut (1) 41 (55)
Valve Housing Bolts 37 (50)
Worm Bearing Race Nut (2) 73 (99)
INCH Lbs. (N.m) 
Allen Head Set Screw 18 (2)
Ball Guide Clamp Bolts 53 (6)
Radiator Bolts 89 (10)
Routing Bracket Screw 71 (8)
(1) Tighten bolt to specification, then tighten nut to nearest cotter pin slot and insert cotter pin.
(2) To obtain proper torque reading when using Adapter T66P-3553-B), multiply desired torque reading by length of torque wrench. Divide result by total wrench and adapter length (5.5"). Example: With a 13" torque wrench, 5.5" adapter and a desired torque value of 55 ft. lbs. (75 N.m), the actual torque reading would be 39 ft. lbs. (52 N.m).