Crankshaft, Engine
| Main Bearing Journal Diameter | 67.483 - 67.503 Millimeter (mm) |
| Maximum Out-Of-Round | 0.0075 Millimeter (mm) Between Cross Sections |
| Maximum Taper (Straightness) | 0.004 Millimeter (mm) |
| Runout FIM Of Center Journals When Located On Front And Rear Journal | 0.05 Millimeter (mm) 3 places |
| Clearance - Crankshaft Journal To Main Bearing Clearance | 0.048 - 0.024 Millimeter (mm) |
| Connecting Rod Journal Diameter | 53.003 - 52.983 Millimeter (mm) |
| Maximum Out-Of-Round | 0.0075 Millimeter (mm) |
| Maximum Taper | 0.004 Millimeter (mm) Between Cross Sections |
| Crankshaft End Play | 0.075 - 0.377 Millimeter (mm) |
| Crankshaft Main Bearing Bolts | Refer to Procedure |