LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1210 (Information System And Entertainment Systems) >> Removal And Installation >> Front Controls Interface Module (FCIM) >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If the front controls interface module (FCIM) is being replaced, it must be replaced as an assembly with the middle center instrument panel center finish panel. However, the middle center instrument panel center finish panel can be replaced individually if the FCIM does not need to be replaced. For additional information on installing a new middle instrument panel center finish panel, refer to INSTRUMENT PANEL AND CONSOLE article.
  1. Remove the audio control module (ACM). For additional information, refer to Audio Control Module (ACM) .
  2. To install, reverse the removal procedure.