Audio Systems Without Navigation
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The terms "audio unit" and "audio control module (ACM)" refer to the same component.
- Turn the audio system on.
- Press and hold the front controls interface module (FCIM) memory preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
- Before the speaker walk-around test is complete, press preset button 6.
- Rotate the TUNE dial until the ACM part number is displayed.
- Record the ACM part number.
- Turn the audio system off.