Control System Outputs: Notes

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The EATC system has 3 control system outputs.

NOTE: For the passenger side temperature setting on hybrid vehicles equipped with a dual-zone Electronic Automatic Temperature Control (EATC) and a Front Controls Interface Module (FCIM) built on or after 4/08/2009 to be functional, a passenger must be seated in the front passenger seat. If the front passenger seat is not occupied, the HVAC module will control the system based only on the driver side temperature setting. The HVAC module receives a Medium Speed Controller Area Network (MS-CAN) signal from the FCIM to indicate if the front passenger seat is occupied.