Spare Key Programming Switch (Enable/Disable)

NOTE: Spare key programming switch is a programmable switch which provides the capability to enable/disable normal customer spare key programming procedure detailed in owner's manual. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want spare key programming procedure available to vehicle driver. Spare key programming switch state can be viewed using PATS PID SPARE_KY.

Insert a programmed ignition key into ignition lock cylinder. Insert Ford Service Function (FSF) card into New Generation Star (NGS) tester or equivalent scan tool. Turn ignition switch from LOCK to RUN position. With NGS tester connected to vehicle, enter INSTRUMENT CLUSTER then select SECURITY ACCESS PROCEDURE. This procedure will take 10 minutes to perform. After security access procedure has been completed, a new menu will be displayed with command options. Default setting on all new vehicles is ENABLE. Select SPARE KEY PROGRAMMING SWITCH. Set SPARE KEY PROGRAMMING SWITCH to ENABLE to allow keys to be programmed or DISABLE to make key programming not accessible.