LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Explorer 2D Utility, 4.0 E, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Module Communications Network >> System Tests >> Test B: Generic Electronic Module/Central Timer Module (Gem/CTM) Does Not Respond To NGS Tester
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test B: Generic Electronic Module/Central Timer Module (Gem/CTM) Does Not Respond To NGS Tester

  1. Turn ignition off. Disconnect GEM/CTM 26-pin connector C280. Inspect connector for physical damage, bent terminals or corrosion. Repair connector as necessary and retest system for normal operation. If connector is okay, go to next step.
  2. Measure resistance of Light Blue/White wire between GEM/CTM connector C280 terminal No. 25 and DLC terminal No. 7. See Figure and Fig 1 . If resistance is less than 5 ohms, replace GEM/CTM and retest system for normal operation. If resistance is 5 ohms or more, repair open in Light Blue/White wire between GEM/CTM connector C280 and DLC. Retest system for normal operation.
Fig 1: Identifying GEM/CTM Connector C280 & RAP Module Connector C336 Terminals
G97A28803Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals