Anti-Lock Brake System (ABS)/Traction Control and ABS/Traction Control with Advance Trac®/IVD Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The need to recalibrate the module is indicated by the active/fail lamp flashing. There are other service actions that can require recalibration when there is no flashing lamp. The lamp will flash after clearing the DTCs that are indicated in the module calibration list.
NOTE:
Always retrieve the continuous DTCs after running the self-test.
NOTE:
DTC C1730 (Reference Voltage Out Of Range) must be repaired before DTC C1279, C1280, C1281, C1282, C1288, C1289.
ANTI-LOCK BRAKE SYSTEM (ABS)/TRACTION CONTROL AND ABS/TRACTION CONTROL WITH ADVANCE TRAC®/IVD DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action | ||||
|---|---|---|---|---|---|---|---|
| B1342 (1) | ECU Is Defective | ABS (1) |
NOTE:
If other DTCs are present, REPAIR them before installing a new component. CLEAR the DTCs. RETRIEVE the DTCs. If DTC B1342 is still present, INSTALL a new module. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) MODULE in this section. REPEAT the self-test. |
||||
| B1483 (1) | Brake Pedal Input Circuit Failure | ABS (1) | Go To PINPOINT TEST B: DTC B1483 - BRAKE PEDAL INPUT CIRCUIT FAILURE . | ||||
| B1676 (1) | Battery Pack Voltage Out of Range | ABS (1) | Go To PINPOINT TEST C: DTC B1676 - BATTERY PACK VOLTAGE OUT OF RANGE . | ||||
| B2477 (1) | Module Configuration Failure | ABS (1) | Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| B2734 (2) | Pedal Travel Sensor (PTS) Supply Error | ABS (2) | Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| B2736 (2) | Pedal Travel Sensor (PTS) Circuit Fault | ABS (2) | Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| B2737 (2) | Pedal Travel Sensor (PTS) Jammed Error | ABS (2) | Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| B2738 (2) | Pedal Travel Sensor (PTS) Spike Error | ABS (2) | Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| B2740 (2) | Pedal Travel Sensor (PTS) Spike Error | ABS (2) | Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| B2741 (2) | Sensor Cluster Loop End | ABS (2) | Follow the diagnostic tool directions for the calibration procedure. REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| B2900 (1) | VIN Mismatched | ABS (1) | VERIFY that the ABS module has the correct as-built data. | ||||
| C1095 (1) | ABS Hydraulic Pump Motor Circuit Failure | ABS (1) | Go To PINPOINT TEST D: DTC C1095 - ABS HYDRAULIC PUMP MOTOR CIRCUIT FAILURE . | ||||
| C1145 (1) | Wheel Speed Sensor RF Input Circuit Failure | ABS (1) | Go To PINPOINT TEST E: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE . | ||||
| C1155 (1) | Wheel Speed Sensor LF Input Circuit Failure | ABS (1) | Go To PINPOINT TEST E: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE . | ||||
| C1165 (1) | Wheel Speed Sensor RR Input Circuit Failure | ABS (1) | Go To PINPOINT TEST E: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE . | ||||
| C1175 (1) | Wheel Speed Sensor LR Input Circuit Failure | ABS (1) | Go To PINPOINT TEST E: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE . | ||||
| C1233 (1) | Wheel Speed LF Input Signal Missing | ABS (1) | Go To PINPOINT TEST F: DTC C1233 (LF), DTC C1234 (RF), DTC C1235 (RR), DTC C1236 (LR) - WHEEL SPEED SENSOR INPUT SIGNAL MISSING . | ||||
| C1234 (1) | Wheel Speed RF Input Signal Missing | ABS (1) | Go To PINPOINT TEST F: DTC C1233 (LF), DTC C1234 (RF), DTC C1235 (RR), DTC C1236 (LR) - WHEEL SPEED SENSOR INPUT SIGNAL MISSING . | ||||
| C1235 (1) | Wheel Speed RR Input Signal Missing | ABS (1) | Go To PINPOINT TEST F: DTC C1233 (LF), DTC C1234 (RF), DTC C1235 (RR), DTC C1236 (LR) - WHEEL SPEED SENSOR INPUT SIGNAL MISSING . | ||||
| C1236 (1) | Wheel Speed LR Input Signal Missing | ABS (1) | Go To PINPOINT TEST F: DTC C1233 (LF), DTC C1234 (RF), DTC C1235 (RR), DTC C1236 (LR) - WHEEL SPEED SENSOR INPUT SIGNAL MISSING . | ||||
| C1277 (1) | Steering Wheel Angle 1 and 2 Circuit Failure | ABS (1) | Go To PINPOINT TEST G: DTC C1277/C1278 - STEERING WHEEL ANGLE 1 AND 2 CIRCUIT FAILURE/FAULTED . | ||||
| C1278 (2) | Steering Wheel Angle 1 and 2 Signal Fault | ABS (2) | Go To PINPOINT TEST G: DTC C1277/C1278 - STEERING WHEEL ANGLE 1 AND 2 CIRCUIT FAILURE/FAULTED . | ||||
| C1279 (2) | Yaw Rate Sensor Circuit Failure | ABS (2) | Go To PINPOINT TEST H: DTC C1279, C1280, C1281, C1282, C2769, C2770 - SENSOR CLUSTER FAULT . | ||||
| C1280 (2) | Yaw Rate Sensor Signal Fault | ABS (2) | Go To PINPOINT TEST H: DTC C1279, C1280, C1281, C1282, C2769, C2770 - SENSOR CLUSTER FAULT . | ||||
| C1281 (2) | Lateral Accelerometer Circuit Failure | ABS (2) | Go To PINPOINT TEST H: DTC C1279, C1280, C1281, C1282, C2769, C2770 - SENSOR CLUSTER FAULT . | ||||
| C1282 (2) | Lateral Accelerometer Signal Fault | ABS (2) | Go To PINPOINT TEST H: DTC C1279, C1280, C1281, C1282, C2769, C2770 - SENSOR CLUSTER FAULT . | ||||
| C1285 (2) | Booster Solenoid Circuit Failure | ABS (2) | Go To PINPOINT TEST I: DTC C1285 - BOOSTER SOLENOID CIRCUIT FAILURE . | ||||
| C1287 (2) | Booster Pedal Force Switch Circuit Failure | ABS (2) | Go To PINPOINT TEST J: DTC C1287 - BRAKE BOOSTER PEDAL FORCE SWITCH CIRCUIT FAILURE . | ||||
| C1288 (2) | Brake Pressure Transducer Input Circuit Failure | ABS (2) | Go To PINPOINT TEST K: DTC C1288 - BRAKE PRESSURE TRANSDUCER INPUT CIRCUIT FAILURE . | ||||
| C1440 | Pressure Transducer Input Circuit Failure | ABS (2) | Go To PINPOINT TEST P: DTC C1440 - PRESSURE TRANSDUCER INPUT CIRCUIT FAILURE . | ||||
| C1730 (2) | Reference Voltage Out of Range (+5 V) | ABS (2) | Go To PINPOINT TEST L: DTC C1730 - REFERENCE VOLTAGE OUT OF RANGE (+5 V) . | ||||
| C1805 (2) | Mismatched PCM and/or ABS Module | ABS (2) | CHECK for correct component and correct PCM and ABS module configuration. INSTALL a new component as necessary. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) MODULE in this section. CLEAR the DTC. REPEAT the self-test. | ||||
| C1963 (2) | Stability Control Inhibit Warning | ABS (2) | This DTC is for information only. GO to the PRINCIPLES OF OPERATION . CLEAR the DTC. REPEAT the self-test. | ||||
| C1969 (2) | Traction Control/Yaw Control Switch Lamp Circuit Fault | ABS | Go To PINPOINT TEST Q: DTC C1969 - TRACTION CONTROL/YAW RATE CONTROL SWITCH CIRCUIT . | ||||
| C1991 (2) | Module Calibration Failure | ABS | CALIBRATE the Traction Control Module. REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| C1996 (2) | Active Yaw Control Disabled | ABS | This DTC can be set if the Advance Trac®/IVD System is activated for 15 seconds of continuous operation. CHECK for any major chassis modifications, gross suspension misalignment or other items that can alter the vehicle tracking dynamics. | ||||
| C1998 (2) | Module Calibration Not Complete | ABS | Go To PINPOINT TEST R: DTC C1998 - MODULE CALIBRATION NOT COMPLETE . | ||||
| C2777 (2) | Sensor Cluster Bus Failure | ABS | Go To PINPOINT TEST S: DTC C2777 AND DTC C2778 - SENSOR CLUSTER BUS FAILURE . | ||||
| C2788 (2) | Sensor Power Supply Failure | ABS | Go To PINPOINT TEST S: DTC C2777 AND DTC C2778 - SENSOR CLUSTER BUS FAILURE . | ||||
| U1009 | SCP (J1850) Invalid or Missing Data for Engine Torque | PCM | REFER to INTRODUCTION article. | ||||
| U1027 | SCP (J1850) Invalid or Missing Data for Engine RPM | PCM | REFER to INTRODUCTION article. | ||||
| U1059 | SCP (J1850) Invalid or Missing Data for Transmission/Transaxle/PRNDL | PCM | REFER to INTRODUCTION article. | ||||
| U1073 | SCP (J1850) Invalid or Missing Data for Engine Coolant | PCM | REFER to INTRODUCTION article. | ||||
| U1243 | SCP (J1850) Invalid or Missing Data for Exterior Environment | PCM | REFER to INTRODUCTION article. | ||||
| U1262 | SCP (J1850) Communication Bus Fault | Network Fault | REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| U1900 | CAN Network 1 Communication Bus Fault-Receive Error | Network Fault | REFER to MODULE COMMUNICATIONS NETWORK . | ||||
| U1901 | CAN Network 2 Communication Bus Fault-Receive Error | Network Fault | REFER to MODULE COMMUNICATIONS NETWORK . | ||||
|
|||||||