Code Description
WARNING:
Injector Driver Module (IDM) supplies 115-volts DC into each fuel injector connected to engine wiring harness. Severe electrical shock hazard exists. DO NOT pierce wires.
NOTE:
After each service or repair procedure has been completed, reconnect all components. Clear DTCs and repeat QUICK TEST procedures to ensure all electronic engine control systems are working properly and DTCs are no longer present.
Perform this test when directed by QUICK TEST. This test is intended to diagnose:
- Injector Driver Module (IDM)
- Wiring Harness Circuit (EF)
- Powertrain Control Module (PCM)