Powertrain Control Module (PCM): Installation
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- Install the PCM and the bolt.
- Tighten to 10 Nm (89 lb-in).
- Connect the 3 PCM electrical connectors and install the clips.
- Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
- Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. For additional information, refer to GENERAL PROCEDURES article.