Pinpoint Test Pc: Data Link Diagnostics Test

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

PC1 RUN THE DATA LINK DIAGNOSTICS TEST
- Carry out the data link diagnostics test.
- Is system passed obtained?
- Yes : The test passed. RETURN to the SYMPTOM CHART for the module in question.
- No : If controller area network (CAN) circuit faults; all electronic control units no response/not equipped, GO to PINPOINT TEST I .
  If international standards organization (ISO) 9141 communications network circuit faults; all electronic control units no response/not equipped, GO to PINPOINT TEST J .
  
  If universal asynchronous receiver transmitter (UART)-based protocol (UBP) communications network circuit faults; all electronic control units no response/not equipped, GO to PINPOINT TEST K .
  
  If no response from the diagnostic tool, GO to PINPOINT TEST L .
  
  If the module in question is no response/not equipped, GO to SYMPTOM CHART .