Functional Components: Notes
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The functional components of the audio system are:
- Audio Control Module (ACM)
- Front Controls Interface Module (FCIM)
- Front Display Interface Module (FDIM)
- Accessory Protocol Interface Module (APIM), located toward the rear end of the floor console
- Audio Digital Signal Processing (DSP) module, located in the RH side of the luggage compartment
- Subwoofer amplifier, located in the RH side of the luggage compartment
- Audio amplifier, located in the RH side of the luggage compartment
- Global Positioning System Module (GPSM), located in the instrument panel
- Speakers (see AUDIO LINE-UP for locations)
- AM/FM antenna (Fusion, Milan), located at the rear of the roof
- Antenna module (MKZ), located at the RH C-pillar
- AM/FM/satellite radio combination antenna (Fusion, Milan), located at the rear of the roof
- Satellite radio antenna (MKZ), located at the rear of the roof
- Global Positioning System (GPS) antenna (integral to the AM/FM/satellite radio antenna (Fusion/Milan) or the satellite radio antenna (MKZ))
- AM/FM antenna cable (must be overlaid on harness)
- Satellite radio antenna cable (must be overlaid on harness)
- Steering wheel controls
- Universal Serial Bus (USB) port and cable, located in the floor console stowage bin
- Audio input jack, located in the floor console stowage bin (vehicles with the SYNC system) or at the front of the floor console (vehicles without the SYNC system)
- Clockspring
- Auto-dimming interior mirror (contains the microphone)