Autolock Programming Using the Keyless Entry Keypad Procedure (If Equipped)
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The autolock feature is not available on vehicles equipped with a manual transmission.
- Turn the ignition to the OFF position.
- Close all the doors, the liftgate and the liftgate glass.
- Enter the 5-digit permanent entry code on the keyless entry keypad.
- Within 5 seconds of entering the code, press and hold the 3/4 button on the keypad. While holding the 3/4 button, press the 7/8 button.
- Release the 7/8 button, then release the 3/4 button. The horn will chirp once to indicate autolock is disabled. If the horn chirps twice (chirp followed by a honk), the autolock feature has been enabled.