Valve Guide Inner Diameter

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Valve guides tend to wear in an hourglass pattern. The ball gauge can be inserted into the combustion chamber side of the valve guide, if necessary.

Use a ball gauge to determine the inside diameter of the valve guides in 2 directions at the top, middle and bottom of the valve guide.

Fig 1: Measuring Valve Guide Inner Diameter

Courtesy of FORD MOTOR CO.

Measure the ball gauge with a micrometer.

Fig 2: Measuring Ball Gauge With Micrometer

Courtesy of FORD MOTOR CO.

If the valve guide is not within specifications, install a new cylinder head assembly.