LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1664 (Information System And Entertainment System) >> Removal And Installation >> Antenna Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH C-pillar trim panel. For additional information, refer to INTERIOR TRIM & ORNAMENTATION -- FUSION, MILAN & MKZ article.
  2. Disconnect the antenna module connectors.
    • Disconnect the antenna cable-to-antenna module connector.
    • Disconnect the antenna module electrical connectors.
    • Disconnect the antenna module-to-antenna connector.
  3. Remove the bolt and the antenna module.
    • To install, tighten to 12 Nm (106 lb-in).
  4. To install, reverse the removal procedure.