Torque Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
| Description |
Nm |
lb-ft |
lb-in |
| Anchor bolt |
10 |
- |
89 |
| Breather cover bolts |
10 |
- |
89 |
| Case cover bolts |
45 |
33 |
- |
| Clutch housing-to-oil pan bolts |
48 |
35 |
- |
| Clutch slave cylinder bolts |
20 |
- |
177 |
| Clutch tube hydraulic line bracket bolts |
22 |
16 |
- |
| Control arm bolt |
12 |
- |
106 |
| Drain plug |
49 |
36 |
- |
| Electronic Power Assist Steering (EPAS) ground bolt |
12 |
- |
106 |
| Fill plug |
49 |
36 |
- |
| Oil pan-to-clutch housing bolts |
48 |
35 |
- |
| Primary and secondary shaft locknuts |
160 |
118 |
- |
| Reverse idler shaft lock bolt |
22 |
16 |
- |
| Roll restrictor bracket bolts |
90 |
66 |
- |
| Roll restrictor bracket through bolt |
90 |
66 |
- |
| Roll restrictor-to-subframe through bolt |
90 |
66 |
- |
| Shim selection set bolts |
45 |
33 |
- |
| Shift control selector plate bolts |
- |
- |
- |
| Shift detent bolt |
18 |
- |
159 |
| Shift gate bolt |
13 |
- |
115 |
| Shift lever assembly bolts |
22 |
16 |
- |
| Shift rail guide bolt |
12 |
- |
106 |
| Splash shield bolts |
9 |
- |
80 |
| Stabilizer bar link nuts |
40 |
30 |
- |
| Steering shaft pinch bolt |
20 |
- |
177 |
| Subframe bracket-to-body bolts |
103 |
76 |
- |
| Subframe nuts |
150 |
111 |
- |
| Transaxle case bolts |
45 |
33 |
- |
| Transaxle rear support insulator bolt and nuts |
80 |
59 |
- |
| Transaxle rear support insulator-to-frame bolts (upper and lower) (4 required) |
63 |
46 |
- |
| Transaxle-to-engine bolts |
48 |
35 |
- |
| Upper transaxle-to-engine bolts |
48 |
35 |
- |
| Vehicle Speed Sensor (VSS) bolt |
9 |
- |
80 |