LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Module Configuration System -- F250-F550 Super Duty) >> General Procedures >> Programmable Module Installation >> Using the Vehicle Communication Module (VCM) When the Original Module is Not Available >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using the Vehicle Communication Module (VCM) When the Original Module is Not Available: Notes

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new module.
  2. Using the VCM and the latest version of the service function card, SELECT: Programmable Module Installation.
  3. Select the module being installed.
  4. Follow the on-screen instructions.
  5. SELECT: Retrieve Module Configuration - Old ECU and press trigger.
  6. Follow the on-screen instructions.
  7. The VCM attempts to retrieve the module data.
    • If the module data is available, go to STEP A .
    • If the VCM displays: Call the As-Built Data Center, go to STEP B .
scientia non olet · About LEMON Manuals