Section 117 (Power Mirrors): Programming
WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
Set outside mirrors, adjustable pedals and driver's side seat to desired position. Press memory SET switch to activate set switch Light Emitting Diode (LED). Within 5 seconds (before LED goes out) select memory position. To select position "1", press memory switch button "1". To select position "2", press memory switch button "2". To select position "3", press memory switch buttons "1" and "2" simultaneously. Memory position can be recalled only while vehicle is in Park or Neutral with ignition switch in OFF position.