LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Engine Controls - System & Component Testing - 7.3L Diesel) >> Hard Start/No-Start Diagnostic Procedures >> Injection Control Pressure Leak Test >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Injection Control Pressure Leak Test: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford RV Cutaway, 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Removing Injection Control Pressure (ICP) sensor and inspecting level in oil rail will determine if oil is being supplied to rail. Removing inspection plug in top of reservoir will help determine if reservoir is full. See Figure. A reservoir that drains back after engine has not been operated for a long period of time can cause a hard start condition. If reservoir empties after filling, ensure it is being supplied oil from low pressure oiling system.