Door Alignment
WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the door latch striker bolts.
- Loosen the front door hinge-to-door bolts.
- Adjust the front door.
- Tighten the front door hinge-to-door bolts.
- Tighten to 30 Nm (22 lb-ft)
- Remove the fender splash shield. For additional information, refer to FRONT END BODY PANELS .
- Remove the fender insulator panel.
- Loosen the door hinge-to-body bolts.
- Adjust the front door.
- Tighten the front door hinge-to-body bolts.
- Tighten to 30 Nm (22 lb-ft)
- Loosen the rear door hinge-to-door bolts.
- Adjust the rear door.
- Tighten the rear door hinge-to-door bolts.
- Tighten to 30 Nm (22 lb-ft)
- Loosen the rear door hinge-to-body bolts.
- Adjust the rear door.
- Tighten the rear door hinge-to-body bolts.
- Tighten to 30 Nm (22 lb-ft)
- Tighten the door latch striker bolts.
- Tighten to 40 Nm (30 lb-ft)
Front and Rear Door
Front Door Horizontal and Vertical Adjustment
Front Door Fore and Aft Adjustment
Rear Door Horizontal and Vertical Adjustment
Rear Door Fore and Aft Adjustment
Front and Rear Door