Key Programming Using One Programmed Key

WARNING: This page is about a different car, the 2002 Lincoln Navigator, 2002 Ford Expedition, 2001 Lincoln Navigator, and 2001 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This procedure is used when customer needs extra keys programmed and 2 programmed keys are not available but system has 2 already programmed ignition keys. A maximum of 8 keys can be programmed. If 8 keys are already programmed, this procedure will not allow any more to be programmed. Number of programmed keys can be determined by accessing PATS PID NUMKEYS with New Generation Star (NGS) tester.

Insert unprogrammed key in ignition and turn ignition switch to RUN position. Connect NGS tester to Data Link Connector (DLC). Insert Ford Service Function (FSF) card in NGS tester. Perform security access procedure. See SECURITY ACCESS PROCEDURE . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to LOCK position. Disconnect NGS tester. Key should now be programmed and be able to start vehicle.