Removal And Installation
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The compass display is part of the overhead console and cannot be replaced separately.
- Remove the screw and release the overhead console from the overhead console bracket.
- Disconnect the overhead console electrical connector.
- To install, reverse the removal procedure.
NOTE:
If installing a new overhead console, set the zone. For additional information, refer to Compass Zone Adjustment . After installing a new overhead console, calibrate the compass. For additional information, refer to Compass Calibration .