General Specifications
WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Pads/Shoes | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) |
| Brake pad maximum thickness variation (pad-to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake shoe minimum thickness | 3.9 mm (0.15 inch) |
| Brake Disc/Drum | |
| Brake disc minimum thickness | 24.75 mm (0.97 in) |
| Brake disc minimum thickness to machine | 25.35 mm (1.0 in) |
| Brake drum maximum inside diameter | Molded into the brake drum |
| Lubricant | |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CXC-31) | ESA-M6C25-A (United States and Canada only) |
| High Temperature Nickel Anti-Seize Lubricant XL-2 (Canada CXG-2-B) | ESE-M12A4-A |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3 | ESE-M1C171-A |
| Brake Parts Cleaner PM-4 | - |