Accessing Freeze Frame Data Mode PIDs
WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
To access FREEZE FRAME DATA MODE, turn ignition off. Ensure test equipment is properly attached. Program scan tool using the following steps:
- Turn ignition on.
- Select VEHICLE & ENGINE SELECTION menu.
- Select NEW VEHICLE, YEAR & MODEL.
- Follow operating instructions from scan tool menu.
- Select DIAGNOSTIC FUNCTIONS. Press CONT button if OBD-II System Readiness Tests (SRT) are not complete.
- Select FREEZE FRAME PID TESTS.