Alternate Keypad Code

To program a personal entry code, enter 5-digit permanent entry code into keypad. Factory set code is located on owners wallet card in glove compartment lid and taped to DDM. Within 5 seconds of pressing last button of permanent code, press 1/2 button and enter alternate 5-digit code, entering each digit within 5 seconds of previous digit. Doors will lock and unlock to confirm programming was successful. To erase personal entry code, enter 5-digit permanent entry code into keypad. Within 5 seconds of pressing last button of permanent code, press 1/2 button and hold for 2 seconds. Doors will lock and unlock to confirm erasure.