Remote Transmitter
NOTE:
After first remote transmitter is programmed, all other remote transmitters will be erased. All remote transmitters must be programmed at the same time. Up to 4 transmitters may be programmed at one time.
- Cycle ignition switch from OFF to ON positions 4 times within 3 seconds. Locks will lock and unlock to confirm programming mode has been entered. Press any button on remote transmitter. Locks will lock and unlock to confirm transmitter has been programmed.
- If additional remote transmitters are to be programmed, perform step 1) with each remaining remote transmitter within 7.5 seconds. To exit programming mode, turn ignition switch to START position or wait 7.5 seconds.