LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2001 >> Escape 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Navigation System) >> Removal And Installation >> Navigation System Display Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, see BATTERY DISCONNECT .
  2. Remove the screw.
    Fig 1: Locating Screw
    G01337542Courtesy of FORD MOTOR CO.
  3. Carefully pull up on the console finish panel and unsnap it from the center console.
  4. Disconnect the harness connectors and parking aid switch (if equipped) and remove the console finish panel.
    Fig 2: Disconnecting Harness Connectors
    G01337543Courtesy of FORD MOTOR CO.
  5. Remove the screws and remove the navigation system display module.
    Fig 3: Removing Navigation System Display Module
    G01337544Courtesy of FORD MOTOR CO.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals