Spring Lock Couplings: Connect

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Inspect and clean the tube fitting, spring lock coupling and the O-ring seals.
- Lubricate the O-ring seals with clean engine oil.

Fig 1: Clean & Inspect Coupling Ends

Courtesy of FORD MOTOR CO.

NOTE: Make sure the spring lock coupling is completely seated and locked in place by pulling on the coupling.

Connect the spring lock coupling onto the tube fitting.

Fig 2: Connecting Spring Lock Coupling Onto Tube Fitting

Courtesy of FORD MOTOR CO.

Install the safety clip.

Fig 3: Identifying Safety Clip

Courtesy of FORD MOTOR CO.

Connect the battery ground cable. For additional information, refer to GENERAL PROCEDURES article.