Powertrain Control Module Programming (Ram Pickup 2500 & 3500 - Gasoline, Ram Van & Ram Wagon)

WARNING: This page does not describe the selected car, but rather 120 other vehicles, including the 2002 Saturn Vue, 2002 Saturn SL2, 2002 Saturn SL1, 2002 Saturn SL, and 2002 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If replacing Powertrain Control Module (PCM), the correct vehicle mileage and Vehicle Identification Number (VIN) must be programmed into PCM to prevent Diagnostic Trouble Codes (DTC) from being set in Controller Anti-Lock Brake (CAB) module and Air Bag Control Module (ACM).

Connect scan tool to Data Link Connector (DLC). DLC is located below driver's side of instrument panel. Turn ignition on. Using scan tool, enter correct VIN and mileage into PCM. Using scan tool manufacturer's instructions, clear DTCs from CAB module and ACM.