- The shift interlock system does not release/lock correctly
|
- Circuitry.
- CJB Fuse 17 (15A) or Fuse 35 (15A).
- Shift lock actuator.
- Brake pedal position (BPP) switch.
|
|
- The shift control is out of correct gear relationship
|
- Transmission shift cable and bracket.
- Retainer bracket.
- Shift control linkage out of adjustment.
|
|
- Transmission range indicator does not correspond to the gear
|
- Transmission shift cable bracket.
- Transmission shift cable loose from the transmission retainer bracket.
- Shift linkage.
|
- TIGHTEN the bolts holding transmission shift cable bracket.
- TIGHTEN the bolts.
- VERIFY digital transmission range (DTR) sensor range for correct adjustment. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION
.
|
- The Transmission Control Switch (TCS) Is Inoperative
|
- CJB Fuse 28 (15A).
- TCS.
- TCS not cycled during self-test.
- Powertrain control module (PCM).
- Circuitry.
|
|
- The Transmission Control Indicator Lamp (TCIL) Is Not Operating Correctly
|
- Bulb.
- Instrument cluster.
- Powertrain control module.
|
|
|
|
- Transmission shift cable.
- Cable bracket.
|
- INSTALL a new transmission shift cable.
- ADJUST the cable. TIGHTEN the screws.
|
- Transmission Range Selector Lever Will Not Shift
|
- Transmission shift cable.
- Broken transmission shift cable.
|
- INSTALL a new transmission shift cable.
- INSTALL a new transmission shift cable.
|