Parameter Identification Definitions
GENERIC ELECTRONIC MODULE PARAMETER IDENTIFICATION DEFINITIONS INDEX
| PID | Description | Expected Value |
|---|---|---|
| IGN_KEY | Key In Ignition Status | IN, OUT |
| IGN_GEM | Ignition Switch Status | START, RUN, OFF, ACC |
| VBATGEM | Battery Voltage | 0.0 VDC - 14.3 VDC |
| D_PWRLY | On Touch Down Relay Coil Circuit Status | ON- - -, OFF- - -, ON-B-, OFFO-G |
| D_PWAMP | Driver's Power Window Motor Current | 0.25 Amp Increments |
| D_PWPK | Driver's Power Window Motor Peak Current | 0.25 Amp Increments |
4-WHEEL ANTI-LOCK BRAKE SYSTEM (4WABS) PID INDEX
| PID | Description | Expected Value |
|---|---|---|
| CONTABS | Number Of Continuous DTCs | One Count Per Bit |
| BOO_ABS | Brake Pedal Position Switch Input | ON, OFF |
| ABSR_O | Rear ABS Outlet Valve | ON, OFF |
| ABSLF_O | Left Front ABS Outlet Valve | ON, OFF |
| ABSRF_O | Right Front ABS Outlet Valve | ON, OFF |
| ABSR_I | Rear ABS Inlet Valve | ON, OFF |
| ABSLF_I | Left Front ABS Inlet Valve | ON, OFF |
| ABSRF_I | Right Front ABS Inlet Valve | ON, OFF |
| LF_WSPD | Left Front Wheel Speed Signal | 0-255 KPH |
| RF_WSPD | Right Front Wheel Speed Signal | 0-255 KPH |
| R_WSPD | Rear Wheel Speed Signal | 0-255 KPH |