LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2001 >> Windstar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Module Communications Network System) >> Removal & Installation >> New Generation Speed Control (NGSC) Servo >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

New Generation Speed Control (NGSC) Servo: Removal

WARNING: This page is about a different car, the 2000 Ford Windstar and 1999 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove air cleaner assembly. Disconnect speed control servo/actuator electrical connector. Remove 2 speed control servo/actuator mounting bolts. Lift and remove speed control servo/actuator.
    2. NOTE: Opening throttle will remove speed control actuator cable tension during this step.
  2. Disconnect speed control cable from throttle body. Depress locking tab on speed control servo/actuator cap and rotate counterclockwise while lifting cap outward. Remove speed control cable slug from speed control servo/actuator pulley and remove speed control actuator cable from speed control servo/actuator pulley.
scientia non olet · About LEMON Manuals