SSA, SSB & TCC In Bench Mode

The BENCH MODE allows the technician to carry out electrical circuit checks on the following components:

• SSA-activates SSA OFF or ON.
• SSB-activates SSB OFF or ON.
• Transmission converter clutch (TCC) - activates TCC OFF or ON.

OSC "SSA, SSB, TCC" BENCH MODE operates ONLY when:

• The digital TR sensor is operational and no digital TR sensor DTCs are present.
• The vehicle speed input is operational and no VSS sensor DTCs are present.
• The transmission range selector lever is in P.
• The key is ON.
• The engine is OFF.

OSC Command Values

• Turns solenoid OFF.
• Turns solenoid ON.
• Cancels OSC value sent.
• Sends the values to PCM.

BENCH MODE Procedure for SSA, SSB and TCC

Follow operating instructions from the scan tool menu screen:

• Select "Output State Control".
• Select "Trans-Bench Mode".
• Select "PIDs" to be monitored.
• Monitor all selected PIDs during test.
• Select "Parameters - SSA, SSB or TCC".
• Select "ON" to turn solenoid ON.
• Press "SEND" to send command ON.
• Select "OFF" to turn solenoid OFF.
• Press "SEND" to send command OFF.
• Select "XXX" to cancel at any time.
• Press "SEND".