LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Cutaway 6.8 S >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Gasoline >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable.
  2. Remove any component(s) necessary to gain access to PCM. For PCM location, see PCM LOCATION  table.
  3. Loosen PCM harness connector retaining bolt.
  4. Unplug harness connector from PCM. Remove 2 PCM mounting bolts.
  5. Remove PCM cover and PCM. On Excursion and F250/F550 Super Duty Pickup, removal of left front fender liner may be necessary to remove PCM connector.
  6. To install, reverse removal procedure.
  7. Tighten bracket bolts and PCM harness connector bolt to specification. See TORQUE SPECIFICATIONS .
PCM LOCATION

Model Location
Econoline Left Side Of Engine Compartment, Near Master Cylinder
Excursion & F250/F550 Super Duty Pickup Behind Left Side Of Instrument Panel, Near Brake Pedal, Through Bulkhead
scientia non olet · About LEMON Manuals