Mirror Control Switch
Remove mirror control switch. See MIRROR CONTROL SWITCH under REMOVAL & INSTALLATION. Check for continuity between specified terminals while operating switch in appropriate direction. See MIRROR SWITCH TEST table. See Fig 1. Continuity should exist between specified terminals. If continuity does not exist as specified, replace switch.
MIRROR SWITCH TEST
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Driver's Mirror | ||
| Up | 1 & 7 | |
| Down | 1, 4 & 6 | |
| Left | 1 & 4 | |
| Right | 1, 6 & 7 | |
| Passenger's Mirror | ||
| Up | 1 & 8 | |
| Down | 1, 3 & 6 | |
| Left | 1 & 3 | |
| Right | 1, 6 & 8 | |