General Specifications
General Specifications (1 Of 2)
| Item | Specification |
|---|---|
| Steering Wheel Turning Effort | 31 Nm (23 Lb/Ft) |
| Steering Wheel Free Play | 3 mm (0.12 In.) |
| Ball Stud Free Play (Maximum) | 1 mm (0.04 in) |
| Steering Gear | |
| Type | XR50 (QSC) Recirculating Ball |
| Ratio | 17:1 |
| Steering Gear Turns (Stop-to-Stop) | 4 |
| Worn Bearing Preload (for Inspection Purposes Only) | 0.9 Nm (8 Lb/In) |
| Total Meshload over Worn Bearing Preload over Ends (for Inspection Purposes Only) | 0.23-0.80 Nm (2-7 Lb/In) |
| Worn to Piston Preload (for Inspection Purposes Only) | 0.11-0.34 Nm (1-3 Lb/In) |
General Specifications (2 Of 2)
| Item | Specification |
|---|---|
| Steering Pump | |
| Type | CIII |
| Flow Rate @74°-80°C (165°-175°F) and Engine Speed Set at 1500 RPM | 10.6-12.0 Liters/Minute (2.8-3.2 gpm) |
| Maximum Pressure @ 74°--80°C (165°--175°F) and Engine Speed Set at 1500 RPM | 1034 kPa (150 psi) |
| Minimum Flow Rate @ 74°--80°C (165°--175°F), Power Steering Analyzer Set at 5102 kPa (750 psi) and Engine Speed Set at Idle | 5.3 Liters/Minute (1.4 gpm) |
| Relief Pressure | 9,000-9,900 kPa (1,300-1,430 psi) |
| Lubricants | |
| MERCON® Multi-Purpose ATFXT-2-QDX | MERCON® |