Removal And Installation
- Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
- Remove the anti-lock brake control module screws and remove the anti-lock brake control module.
- To install, reverse the removal procedure.
CAUTION:
Once the new module is installed, the module configuration information may have to be entered. For additional information, refer to MODULE CONFIGURATION
.
NOTE:
When the battery is disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.