General Specifications
BRAKE SYSTEM GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Pads | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) |
| Brake pad maximum thickness variation (pad -to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake Disc | |
| Front brake disc minimum thickness | 24.5 mm (0.96 inch) |
| Rear brake disc minimum thickness | 11.0 mm (0.43 inch) |
| Minimum thickness to machine front brake disc | 25.1 mm (0.98 inch) |
| Minimum thickness to machine rear brake disc | 11.6 mm (0.45 inch) |
| Lubricants | |
| High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB | ESA-M6C25-A DOT 3 |
| High Temperature Nickel Anti-seize Lubricant F6AZ -9L494-AA |
ESE-M12A4-A |
| Silicone Brake Caliper Grease and Dielectric Compound | XG -3-A ESE-M1C171-A |
| Brake Parts Cleaner PM-4 | - |