LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Focus S2 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnosis And Testing >> Transaxle Drive Cycle Test >> After On-Board Diagnostics
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

After On-Board Diagnostics

NOTE: The vehicle wiring harness, powertrain control module and non-transaxle sensors may affect transaxle operations.

Repair these concerns first.

After the on-board diagnostic procedures are completed, repair all DTCs.

Begin with non-transaxle related DTCs, then repair any transaxle related DTCs. Refer to the DIAGNOSTIC TROUBLE CODE CHART  for information on condition and symptoms. This chart will be helpful in referring to the correct manual(s) and aids in diagnosing internal transaxle concerns and external non-transaxle inputs. The pinpoint tests are used in diagnosing transaxle electrical concerns. Make sure that the vehicle wiring harness and the PCM are diagnosed as well. The PCED will aid in diagnosing non-transaxle electronic components.

scientia non olet · About LEMON Manuals