EMTC Module (Climate Control Assembly)

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The climate control assembly integrates the temperature control, mode function selection, A/C request button, recirculated air request button and rear defog button into a single unit.

The temperature control switch setting determines air temperature. Movement of the temperature knob from COOL (blue) to WARM (red) causes a corresponding movement of the temperature blend door and determines the air discharge temperature that the air distribution system will maintain. The temperature control switch is an integral part of the climate control assembly and cannot be installed separately.

The A/C request button determines A/C compressor operation, except when the function selected is OFF, MAX A/C, DEFROST, or FLOOR/DEFROST. The A/C request button an integral part of the climate control assembly and cannot be installed separately.

The recirculated air request button can select recirculated air in any mode except MAX A/C, OFF or DEFROST.

The rear defog button (if equipped) signals activation of the heated backlight and heated exterior rear view mirrors. The rear defog button is an integral part of the climate control assembly and cannot be installed separately.

The heated mirror button (if equipped) signals activation of the heated exterior rear view mirrors. The heated mirror button is an integral part of the climate control assembly and cannot be installed separately.

The EMTC module is not equipped with self-test capabilities.