Driver Memory Seat Module C341a
WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
PINS CIRCUIT REFERENCE
| Pin Number(s) | Circuit Designation/Description | Normal Condition/Measurement |
|---|---|---|
| 1 | CKT 33-AH37 (YE/GN) Rearward output circuit from DSM to power seat motor | Less than 5 ohms to the power seat motor and less than 5 ohms to ground when disconnected. Greater than 10 volts when connected and the switch is in rearward. |
| 2 | CKT 32-AH36 (WH/RD) Rearward recliner output circuit from DSM to power seat motor | Less than 5 ohms to the power seat motor and less than 5 ohms to ground when disconnected. Greater than 10 volts when connected and the switch is in rearward. |
| 4 | CKT 8-AH26 (WH/RD) Horizontal sense signal circuit from power seat memory position sensor to DSM | Continuity to DSM, less than 5 ohms. Voltage varies based on seat position when connected. |
| 5 | CKT 8-AH24 (WH/BK) Front sense signal circuit from power seat memory position sensor to DSM | Continuity to DSM, less than 5 ohms. Voltage varies based on seat position when connected. |
| 7 | CKT 33-AH38 (YE/BK) Front down output circuit from DSM to power seat motor | Less than 5 ohms to the power seat motor and less than 5 ohms to ground when disconnected. Greater than 10 volts when connected and the switch is in front down. |
| 8 | CKT 33-AH41 (YE/VT) Rear down output circuit from DSM to power seat motor | Less than 5 ohms to the power seat motor and less than 5 ohms to ground when disconnected. Greater than 10 volts when connected and the switch is in rear down. |
| 9 | KT 33-AH36 (YE/RD) Forward recliner output circuit from DSM to power seat motor | Less than 5 ohms to the power seat motor and less than 5 ohms to ground when disconnected. Greater than 10 volts when connected and the switch is in forward. |
| 10 | CKT 32-AH37 (WH/GN) Forward output circuit from DSM to power seat motor | Less than 5 ohms to the power seat motor and less than 5 ohms to ground when disconnected. Greater than 10 volts when connected and the switch is in forward. |
| 11 | CKT 9-AH80 (BN/WH) Driver seat sensor common circuit to power seat motor sensors | Continuity to DSM, less than 5 ohms. |
| 13 | CKT 8-AH30 (WH/BU) Recliner position sensor circuit to power seat recliner motor sensor from DSM | Continuity to DSM, less than 5 ohms. |
| 14 | CKT 8-AH25 (WH/GN) Rear position sensor circuit to power seat motor sensor from DSM | Continuity to DSM, less than 5 ohms. |
| 15 | CKT 7-AH80 (YE/VT) Feed circuit to power seat memory position sensor to DSM | Continuity to DSM, less than 5 ohms. |
| 16 | CKT 32-AH41 (WH/VT) Rear motor up output circuit from DSM to power seat motor | Less than 5 ohms to the seat control switch and less than 5 ohms to ground when disconnected. Greater than 10 volts when connected and the switch is in rear up. |
| 17 | CKT 32-AH38 (WH/BK) Front up output circuit from DSM to power seat motor | Less than 5 ohms to the power seat motor and less than 5 ohms to ground when disconnected. Greater than 10 volts when connected and the switch is in front up. |