Power Mirror Control Switch
Remove power mirror control switch. See POWER MIRROR CONTROL SWITCH under REMOVAL & INSTALLATION. Operate mirror control switch to appropriate position. See MIRROR CONTROL SWITCH TEST table. And measure resistance between mirror control switch appropriate terminals. See Fig 1. Resistance in all tests should be 5 ohms or less. If power mirror control switch fails any portion of test, replace mirror control switch.
MIRROR CONTROL SWITCH TEST
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Driver's Mirror | ||
| Up | 1 & 3; 5 & 6 | |
| Down | 1 & 6; 3 & 5 | |
| Left | 1 & 4; 5 & 6 | |
| Right | 1 & 6; 4 & 5 | |
| Passenger's Mirror | ||
| Up | 1 & 7; 5 & 6 | |
| Down | 1 & 6; 5 & 7 | |
| Left | 1 & 8; 5 & 6 | |
| Right | 1 & 6; 5 & 8 | |