LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Thunderbird >> Repair and Diagnosis >> Suspension >> Front Suspension >> Disassembly And Assembly >> Shock Absorber and Spring Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shock Absorber and Spring Assembly: Assembly

NOTE: If a new shock absorber, spring or upper mount is installed, the new part should be marked in the same place as the old part to make sure the assembly is correctly aligned.
  1. Inspect the lower and upper spring seats for damage.
  2. Inspect the spring insulator for wear or damage. Install a new upper mount if necessary.
    3. NOTE: If installing a new spring, make sure the part number is correct. Refer to the vehicle certification (VC) label for the correct spring code.
  3. Inspect the spring for nicked or scratched paint. If the paint is nicked or scratched, install a new spring.
  4. If removed, place the shock absorber into the vise.
  5. Position the shock and spring compressor onto the strut.
  6. Position the upper mount and dust boot onto the spring. Make sure the marks made during disassembly, Step 2, are lined up.
  7. Install a new nut.
  8. Remove the spring compressor.
  9. Install the shock absorber and spring assembly. For additional information, refer to SHOCK ABSORBER AND SPRING ASSEMBLY .
scientia non olet · About LEMON Manuals