Component testing procedure
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MASTER WINDOW CONTROL SWITCH MKZ - COMPONENT TESTING TABLE
| Circuit to test | Connect self powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Switch lock | 3, C535b and 4, C535b | Lock On | Closed circuit |
| Lock Off | Open circuit | ||
| Left front window circuit | 3, C535a and 4, C535a | Up | Closed circuit |
| 3, C535a and 7, C535a | Down | Closed circuit | |
| 3, C535a and 8, C535a | One Touch Up/Down | Closed circuit | |
| Right front window circuit | 3, C535a and 5, C535a | Up | Closed circuit |
| 3, C535a and 2, C535a | Down | Closed circuit | |
| 3, C535a and 1, C535a | One Touch Up/Down | Closed circuit | |
| Left rear window circuit | 3, C535b and 2, C535b | Up | Closed circuit |
| 3, C535b and 1, C535b | Down | Closed circuit | |
| Right rear window circuit | 3, C535b and 8, C535b | Up | Closed circuit |
| 3, C535a and 7, C535b | Down | Closed circuit |