Powertrain Control Module (PCM): Removal
WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
- Remove the battery tray. For additional information, refer to BATTERY, MOUNTING AND CABLES .
- Disconnect the 2 PCM electrical connectors.
- Remove the 4 bolts and the PCM.
NOTE:
PCM replacement DOES NOT require new keys or programming of keys.