Fuel Pump Module: Removal
- Remove fuel filler cap to release fuel tank pressure. Remove relief valve (Schrader valve) cap. Relief valve is located on fuel supply manifold. Using Fuel Pressure Gauge (T80L-9974-B), release fuel pressure from relief valve.
- Depress 2 clips securing front of rear seat cushion, and remove rear seat cushion. Disconnect 2 wiring harness connectors from fuel pump module.
- Remove 4 screws retaining fuel pump module access cover and remove access cover. Remove any dirt from around fuel pump module flange area. Disconnect fuel line from fuel pump module. Remove retainer ring and open fuel pump module cover. Push inward on locking tabs and remove fuel pump module.
CAUTION:
Fuel pump module must be handled carefully to avoid damage to float arm and filter during removal. Fuel pump module will contain residual fuel. Lift straight up and out of tank to drain remaining fuel out of reservoir. Drain excess fuel into suitable container.